Homemade Solar Panels Diy tutorial, complete build

In this video I'm showing you how I built some solar panels from start to finish I tried to make it as detailed as possible. These panels cost me very little to build and are fun projects for everyone. This is just one way of doing this there are lot's of others doing this and good videos out there. Presently I'm using my panels at a job site where there is no electricity available they are running my RV off the grid. These panels are not encapsulated but they work well and low cost not for on roof installation best to be close to ground for inspection.
26 thoughts on “Homemade Solar Panels Diy tutorial, complete build”
Leave a Reply
You must be logged in to post a comment.
Check INPLIX and learn more about it. My boss was talking to me about
inplix (INPLIX) , after seeing it on the news. He said he has saved almost
70% on her utility bill and I’m thinking about giving this new program a
shot. Has anybody else used it? It seems to be super popular.
nice
acronyms, the bane of my life !
what is an RV ???
https://www.google.com/search?q=rv&newwindow=1&safe=off&biw=1920&bih=971&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiyhaT4r8jNAhWEmx4KHWImBgEQ_AUICCgD
recreational vehicle.
what can you power with those 4 panels together
How much power it gives for output
Thank you for sharing this!🖖🙂❤👍
U R the best man …. its the best video i ever seen about solar cell
…thx bro
I noticed that one of your panels cracked off a little bit
Why are the tabs so short and stuby?
1:59 oh ya these are so delicate careful how you handle them. at 4:01 oh ya
just thrown everything i have on top of them . no worries.
you beat me to it….. hahaha
Good video, thanks !
You could talk more about voltage / ampage and the effect of parallel /
serial branching of cells.
Why not plexi ?
check INPLIX
people don’t need to learn how to framed they also don’t need to use ready
made cells.tell them how to make cells not how to frame them .tell them if
you know
what kind of material are these cells made of ?
You’re a great teacher!
Output Voltage?
+Selim Can Şentürk 0.5 volts per cell, so I would assume 8 volts because
they are wired in series.
There are new green energy kits on
facebook.com/diyhomeenergykits/app/190322544333196 that can help
dude that’s hard
You ar fantastic, you should be a teacher. I really the way you take ur
time to explain, good job guy
Thank you for sharing. This is the best video I have seen yet.
What solar panels are you using and whats the wattage of your soldering
iron?
That was the best video I have seen so far .. thank you!