Szia igazad van és nagyon hamarosan föl rakom a videó anyagot,csak ugy mond
itt is a generátort még egy kicsit csiszolni kel de müködik már fél éve
folyamatosan adja le az 5 kw teljesítményt.
I suggest you follow the schematic at Energetic Forum. It’s called the
“Deadly Kapagen.” You can find the schematic if you google the following:
“Kapagen Theories, Replications, Winding Diagrams, Circuits & Schematics.
KAPAGEN ONLY”
You should check out the JLNlabs replica of the kapagen… I also tried to
replicate that device but it was underunity. The spark gap is actually
doing your frequency step up, but its still not enough to draw in a gain
from ambient. I have another device I call the bellerian apparatus and it
takes in 60hz mains, and the HV side runs at 2.63mhz. The frequency step up
is achieved by the spark gap. 😉
Germeten is right about resonance. Although I think TK was using magnetic
resonance while Tesla used electrical resonance. I know its just semantics.
This might shed some light on TK grounding terminals on the receiver.
prometheus-al-ru /phisik/wireless.htm and WORLD SYSTEM OF WIRELESS
TRANSMISSION OF ENERGY in Telegraph and Telegraph Age, October 16, 1927
article by N. Tesla
Hey Germeten, I have never heard that before, very interesting…so are
saying it’s because of the spark gap you are able to tap into the natural
earths resonate frequency? So it’s really important to get a really good
earth?
Makes sense that the higher the frequency, the higher the output, as to my
understanding, the REASON why you get more at the output, is that BEFORE
you start the machine, THE COIL ALREADY HAS A RESIDUAL CHARGE OF ELECTRON
AT REST IN THE COPPER ITSELF!!! That means that a tiny droplet of electrons
is ADDED to EVERY CYCLE…Meaning…..THE MORE CYCLES=THE MORE DROPLETS OF
ELECTRONS ADDED TO THE INPUT!!! 20khz = 20 000 droplets added to your
input, per second!!!! ;-)))
Can you DISCONNECT THE JUICE FROM IT and let it FEED ITSELF??? Cause
otherwise, it ain’t much of a demonstration either! You’re sucking juice
from the socket!!! ;-)))
Such a device is very dependant on high frequency for power output
therefore is a high voltage low current device.Your load is more suited to
the opposite;try many low wattage lamps in series.
Tisztelt 949mohácsi ebben az esetben fel tehetnél 1 pár videót !! Mert ugye
mindenki azt mond amit akar 😀
Kapanadze is from my country
please send me scheme
Ca-Pa-Nod-Z = Kapanadze
Oh gente, como diz o povo do nordeste… que diacho é este?
Would you like me to send in the mail scheme devices like how you made it
markovujicic00@hotmail.com Thank you.
antenna
Várom a videót -kat
Szia igazad van és nagyon hamarosan föl rakom a videó anyagot,csak ugy mond
itt is a generátort még egy kicsit csiszolni kel de müködik már fél éve
folyamatosan adja le az 5 kw teljesítményt.
I suggest you follow the schematic at Energetic Forum. It’s called the
“Deadly Kapagen.” You can find the schematic if you google the following:
“Kapagen Theories, Replications, Winding Diagrams, Circuits & Schematics.
KAPAGEN ONLY”
You should check out the JLNlabs replica of the kapagen… I also tried to
replicate that device but it was underunity. The spark gap is actually
doing your frequency step up, but its still not enough to draw in a gain
from ambient. I have another device I call the bellerian apparatus and it
takes in 60hz mains, and the HV side runs at 2.63mhz. The frequency step up
is achieved by the spark gap. 😉
Üdvözlök itt mindenkit a generátort sikerült elő állítani 5-10-15-20-25kw
teljesítményben 220v és 380v-ban,Most megyek rá a 100kw-tól felül.
Germeten is right about resonance. Although I think TK was using magnetic
resonance while Tesla used electrical resonance. I know its just semantics.
This might shed some light on TK grounding terminals on the receiver.
prometheus-al-ru /phisik/wireless.htm and WORLD SYSTEM OF WIRELESS
TRANSMISSION OF ENERGY in Telegraph and Telegraph Age, October 16, 1927
article by N. Tesla
Hey Germeten, I have never heard that before, very interesting…so are
saying it’s because of the spark gap you are able to tap into the natural
earths resonate frequency? So it’s really important to get a really good
earth?
grounding to the earth maybe??? lol
Makes sense that the higher the frequency, the higher the output, as to my
understanding, the REASON why you get more at the output, is that BEFORE
you start the machine, THE COIL ALREADY HAS A RESIDUAL CHARGE OF ELECTRON
AT REST IN THE COPPER ITSELF!!! That means that a tiny droplet of electrons
is ADDED to EVERY CYCLE…Meaning…..THE MORE CYCLES=THE MORE DROPLETS OF
ELECTRONS ADDED TO THE INPUT!!! 20khz = 20 000 droplets added to your
input, per second!!!! ;-)))
Can you DISCONNECT THE JUICE FROM IT and let it FEED ITSELF??? Cause
otherwise, it ain’t much of a demonstration either! You’re sucking juice
from the socket!!! ;-)))
Such a device is very dependant on high frequency for power output
therefore is a high voltage low current device.Your load is more suited to
the opposite;try many low wattage lamps in series.
hola me pasarías el esquema de la bobina y la instalación?muchas gracias